New Jersey neighbors press Corzine to address toxic schools

Our neighbors in New Jersey have formed a coalition to take action on the issue of schools and day care facilities that have been built on or near toxic sites. Here's the article. They are pressing Governor Corzine to take action on this issue. We too have an issue of toxic schools in NYC with PCBs potentially affecting hundreds of buildings. If you want to be part of a coalition of concerned citizens who is making their voices heard on this issue let me know.

NYC DoE memo to custodial staff regarding PCBs

Not sure this is out there, but the DoE's Division of School Facilities Office of Building Services sent out a memo to custodial staff and building managers. Here is the full text. It asks them to conduct regular inspections and cleanings of surfaces that may have PCBs and of caulking to observe deterioration and disturbances. I hope this is being followed by the custodial staff across the city. Its a good initial step but we still need the custodial staff to have clear rules as to how to clean PCB contaminated areas.

Student made PCB public service announcement video

Here's a great short video PSA about PCBs made entirely by students.

Text of NYC Council PCB Resolution

I mentioned this was being introduced in a previous post. Here is the text of the bill as well as a status report. It is currently with the Committee on Environmental Protection. I urge you to contact your city council member to ensure broad support for this resolution.

PCB bill in NY State Assembly

This is interesting. I just stumbled on it. Glad to see our representatives in Albany are taking notice of this issue. Since Rosenthal is the only name on the bill, I am guessing it is Linda B. Rosenthal who is the assembly person for the upper west side of Manhattan where PS 199 is located. That school community has been very active in making their voices heard on this issue as I have written about before. The bill is currently in the Committee on Education so I recommend you urge your representatives in Albany to support this bill.

NY Daily News: Reps. Crowley and Serrano urge federal aid for PCB cleanup

"Reps. Joseph Crowley and Jose Serrano urge federal aid for PCB cleanup"

This is a good first step to begin to address the funding issue for schools across the country to clean up PCBs from their buildings. My guess though is that since this is lumped in with a broader school infrastructure improvement bill, PCB cleanup will not take a priority. We need to continue to call for federal legislation that specifically targets PCB removal from schools and other buildings and also for regulations that clearly state how to thoroughly clean PCB contaminated buildings on a regular basis until the PCBs can be safely removed.

NYTimes: Tons of PCBs May Come Calling at a Down-at-the-Heels Texas City

"Tons of PCBs May Come Calling at a Down-at-the-Heels Texas City - NYTimes.com"

So while we in NYC are trying to get rid of PCBs from our schools, a company with operations in Texas is trying to bring more of this toxin into our country to turn a profit.

Full text of NYC Dept of Health testimony at NYC Council Apr. 29th hearing

Just found this online. Its the full text of the testimony of the NYC Department of Health and Hygiene that was given to the NYC Council during their April 29th special emergency hearing on PCBs in NYC schools.

NYC Council introduces PCB legislation

Though it has not been posted online yet, I saw a print copy of legislation that has been introduced by the New York City Council that calls for full PCB testing of all NYC schools built or renovated before 1978. Good first step and I encourage you to contact your council member to support this legislation and continue with efforts to rid our schools of PCBs.

Congressional legislation aims to protect children from unsafe chemicals

The Kid Safe Chemical Act was introduced earlier this week in Congress to put the responsibility on chemical companies to test and prove that chemicals are safe before they can be allowed to be used in every day products. Good stuff. Anyone who cares about the safety of our children should contact their Congressman or Senator to encourage them to support this bill.

Dangerous chemicals are in your baby's crib and car seats

Wow! Is the chemical industry just not testing anything they put in products to see how potentially harmful they can be? Here's a blog post on CNET about a new report detailing how various harmful chemicals are in products specifically made for children.

Manhattan School Gets Federal EPA involved

PS 199 in Manhattan has taken the step of writing a letter to the federal EPA signed by a number of local and nationally elected officials to get action on the issue of PCBs in their school. Here are some related news articles:

WCBS TV

Daily News

New York Sun

NYTimes blog: Report Faults City on ‘Potentially Toxic’ School Sites

Just when you thought all we had to deal with were PCBs...
Here's another thing parents, teachers and students need to worry about...potentially toxic schools housed in leased buildings which are subject to much less stringent environmental oversight (though obviously not stringent enough since we now know many schools have PCBs) than buildings owned by the city.

Staten Island school gets 3rd PCB test

This was a few days ago but thought it was interesting to note that because of pressure from the school community a 3rd test was taken at this school in Staten Island. It however was not a test of the caulk, just the air. Testing the air, dust and soil is a good first step but if any of them have elevated levels of PCBs the next step should be to test the caulk itself.

NYC Dept. of Health official waffling on PCBs health effects

Here’s some interesting info. As I have mentioned in other postings on this blog, back in 2005 a parent at a school in Yorktown Heights, New York took it upon himself to have caulking tested which then eventually led to the full testing and removal of all PCB contaminated caulking. Here is a letter from the Mount Sinai Pediatric Environmental Health Specialty Unit applauding that parent’s efforts. Below is an excerpt from this letter.

“PCBs in the French Hill Elementary School can represent a risk for the students who spend from 35 to 50 hours per week in and around the facility. Decreasing exposure will help protect the children from potential health effects now and in the future. Removing window caulking known to contain PCBs in the school will remove the source.

The Pediatric Environmental Health Specialty Unit applauds your work in protecting the children of French Hill Elementary School from exposure to PCBs. We also continue to follow and support you in your effort to decrease exposure to PCBs at other sites.”

Note that one of the signatories to this letter is a Dr. Nathan Graber. He now works at the New York City Department of Health and is the one making the rounds at different schools trying to assure parents and teachers that there is no significant risk at any of the schools that have tested positive for PCBs. I have my own opinions but I’ll leave it up to you, the reader, to come to your own conclusions.

City tries to reassure Staten Island school community about PCBs

New York city officials tried to reassure parents and others that there were low or no detectable levels of PCBs in a Staten Island school even though a parent's child, who has asthma, had his asthma filter tested finding high levels of PCBs. As I keep saying, until and unless city officials take decisive steps to fully test and then remove contaminated caulking instances like this one are only going to increase.

Staten Island Parents and Students Protest Over PCBs at School

This is the first instance I have heard of people protesting and in sizable numbers over PCBs found in New York City schools since this story broke a few weeks ago. I expect more to come if the city does not take quick and decisive action to address parents, teachers and students concerns.

NY Daily News: Parent tests turn up toxic PCBs at 'clean' public schools

Looks like parents are starting to take things into their own hands and having independent testing done. This one had findings that contradict what the city found.

"Parent tests turn up toxic PCBs at 'clean' public schools"

NY1 story on PCBs and BPAs

Here's a NY1 article on the recent NYC Council meeting on PCBs and also discusses the recent issue of BPAs, chemicals found in many plastic bottles, including baby bottles, which are also hazardous to our health, especially children.

EPA convention to focus on hazardous waste cleanup

The US Environmental Protection Agency is hosting an event to discuss hazardous waste cleanup including PCBs. Glad this is being seriously looked into at the national level.

NY City Council Hearing on PCBs

An emergency information gathering hearing by the New York City Council was held today to discuss PCBs in New York City schools. We'll have to wait for the full results but here are a couple of resulting news articles:

Staten Island Advance

WCBS TV

Kruger Introduces Bill To Mandate PCB Testing in City Schools

State Senator Kruger of Brooklyn is calling for testing of all suspect schools in New York City:

"Kruger Introduces Bill To Mandate PCB Testing in City Schools"

Here's an excerpt:

“They test for everything else — math and reading, regular assessment tests, and every other academic area big and small,” he said. “But when it comes to the real high-stakes testing — testing for the sake of health — they do nothing.”"

AFT video and report highlight our crumbling schools

Harlem teacher - "We are teaching in a toxic environment"

Here's an article that came out today by a teacher at an East Harlem elementary school:

"Health hazard in a Harlem school"

This school's caulk was found to have PCBs of 5,300 ppm, more than 100 times the acceptable limit, yet DOE seems to be downplaying the seriousness of the matter. Here's an excerpt:

The Daily News article cites studies indicating that exposure to PCBs can "inhibit the growth of brain cells" in children and has been linked to "anti-social behavior, depression and attention deficit hyperactivity disorder-type symptoms."

Probably not a good idea to leave the stuff lying around in an elementary school, right?

Well, not according to the NYC Department of Education (DOE). After learning about the Daily News findings, the DOE conducted its own investigation and found that the PCBs had not become airborne (except in one of the schools named in the report--not ours).

The DOE maintains that the caulk isn't hazardous as long as it's left "undisturbed." However, according to a fact sheet from our union, the United Federation of Teachers, on government environmental regulations, "Materials containing 50 parts per million (ppm) or more of PCBs must be disposed of as a hazardous material." The Daily News reported that our school's caulk has PCBs of 5,300 ppm--more than 100 times the acceptable limit.

2006 Study - Soil Contamination from PCB-Containing Buildings

Here's an interesting study that was done in 2006 about the amount of PCBs found in soil surrounding buildings that had PCB contaminated caulk.

"Soil Contamination from PCB-Containing Buildings"

Here's a pretty interesting excerpt: Our findings suggest that the most likely cause of soil contamination found around these PCB-containing buildings is natural weathering.

So basically weather causes PCBs to go into the soil from caulk. Which I take to mean that any building that has PCB contaminated caulk on the outside of the building will have significant levels of PCBs in the soil as well just due to weather. This is not good for schools since kids play outside in the contaminated soil further increasing their exposure to PCBs.

Daily News - Bronx officials push for PCB check

Looks like our elected officials are starting to take some initial steps to address the issue of PCBs in schools.

"Bronx officials push for PCB check"

It is hard to understand why the DOE is not taking this issue more seriously:

...the Department of Education has not acknowledged that the illegal contamination is a problem...

The DOE has so far said it has no plans to test for PCBs at the more than 250 other city schools built between 1960 and 1977, despite the city's own air and dust testing turning up elevated PCB levels at schools where The News found contaminated caulk.

This is a national issue that needs a national solution so it is good to see that members of Congress are starting to look at legislation that will address this issue across the country:

On a national level, Bronx Reps. Joe Crowley (D-East Bronx, Queens) and José Serrano (D-South Bronx) are taking the lead on legislation to find and remove all PCB caulking from schools, hospitals and public housing across the country.

Let's hope these efforts continue to gain support to really have a positive impact.

NYTimes article from 2005 about PCBs found in Westchester School

Interesting article from July 2005 about a school in Yorktown Heights in Westchester County, New York that, because of a parent who took it upon himself to get the school caulking tested, ensured that the PCB contaminated areas were cleaned up.

"Tainted Soil to Be Removed Next to Westchester School - New York Times"

The last 2 paragraphs are not very encouraging:

Little is being done at the state level to address the issue. The State Education Department has notified schools of the findings in Dr. Herrick's study through a newsletter. Assemblyman Thomas P. DiNapoli, the chairman of the Assembly's Committee on Environmental Conservation, said he was considering sponsoring legislation that would finance a pilot program to test for contaminated caulk in schools and perhaps other buildings.

But environmental groups expect that advancing such legislation will be difficult. "What schools have a tendency to do is have a 'don't ask, don't tell' approach - they're afraid if you find something, then you'll have to do something about it," said Kathleen Curtis, executive director of the Citizens' Environmental Coalition, an Albany-based advocacy group. "School districts are tight on money. There's been a tremendous amount of difficulty getting a bill passed to test for lead in school water fountains."

California High School PCB cleanup

A high school in California recently started a PCB cleanup project after PCBs were found in the soil around the school. More proof that this is an issue that schools across the country are having to cope with. San Mateo Daily News

PCBs are a national issue!!

If you need any proof that PCBs are not just a New York or northeast issue, check out this article about a proposed toxic waste landfill in Illinois. "Obama, Durbin concerned about chemical waste at Clinton landfill". This is truly a national issue that needs to have a national solution for removing PCBs from society.

PCB history is not pretty

Here is the infamous history of PCBs from their early discovery in 1865 all the way up to this century. It details how harmful these toxins have been and the slowness to react to by industry to clean up and address the very serious health issues that the toxins created.

Cleaning schools of PCBs

One of the main issues that I have heard is how does a school that has been found to have PCBs in the dust keep itself clean in a way that will ensure the PCB contaminated dust is minimized on an ongoing basis. NY city officials have said that no special chemicals or materials are needed only soap and water to wet wipe up the dust and a vacuum cleaner with a proper filter since sweeping only moves the dust around and kicks it up into the air creating a more hazardous environment. Well, according to the NYC Department Of Education's general facilities cleaning plan, sweeping is the primary way to clean up floors and not by using vacuums. I think someone needs to take a closer look at this and make some changes.

TEST THE CAULK!!!!!

According to the NY State Education Department, "the U.S. EPA regulates the disposal of caulk, as well as soil and other materials contaminated with PCBs from caulk, if the concentration of PCBs exceeds 50 ppm." So basically if NY city officials test the caulk in city schools and find that the concentration of PCBs exceeds 50 ppm then by law the caulk must be removed and properly disposed of. Interesting to note that I have not seen any city agency (i.e. Departments of Education, Health, etc.) or officials from the Mayor's office call for testing of PCB levels in the caulk. Some other elected officials have called for this but the agencies charged with safeguarding the educational environment of our children have not. I guess 'sweeping' it under the rug is less costly than removing the source of the PCBs from our schools.

Times Ledger article on PCBs

Another local newspaper brings this issue of PCBs in schools to the public.

United Federation of Teachers speaks out on PCBs

Here's a statement by UFT President Randi Weingarten on the 'better safe than sorry' approach the UFT is adopting on PCBs.

NY Daily News - School Bigs Talk ABCs of PCBs

And yet another article by the NY Daily News on the issue of PCBs in NYC schools. This paper is definitely on top of this issue more so than any other news outlets.

Queens Courier on PCBs

Local Queens newspaper on reports of PCBs in NYC schools.

Talk Bronx on PCBs in NYC schools

Local online Bronx information source, Talk Bronx, highlights issue of PCBs in NYC schools.

WABC7 TV on the PCB NYC schools findings

Here's a local TV report on the findings of PCBs in NYC schools.

NY Daily News - Outcry grows for PCB testing

Here is another New York Daily News article. This one is highlighting schools in Brooklyn, the borough with the most schools constructed between 1960 and 1977 when PCBs were banned.

NYC Schools PCB Sampling Reports

Here is a site that has the full data from the PCB sampling taken in various New York City schools.

Letter from New York City Health Commissioner on PCBs in schools

This is a letter that the New York City health commissioner wrote to the New York Daily News in response to their article on the issue of PCBs in schools. It irks me and many other parents, teachers and concerned citizens that city officials who new that these buildings were built back in the 1960s and 70s using PCB contaminated materials only now, in response to the news media breaking the story, are starting to publicly address this issue.